High Gloss DTM Industrial Acrylic Polyurethane

​

6B.1.K1 is a two pack medium solids acrylic polyurethane DTM topcoat created for painting all types of ferrous metals. Care must be taken in surface preparation when DTM applications are used. An appropriate primer is always the best way to insure a longer life and finer finish.

Suggested Uses

As a high performance topcoat over suitable primers or over properly prepared substrates, including: Hot and Cold roll steel, Galvanized Steel, Aluminum, fiberglass, plastics and wood

where:

• Outstanding Gloss and color retention are desired.

• Outstanding adhesion and flexibility is required.

• Excellent DOI and leveling is required.

• Excellent performance when using air-assist airless, pressure pot, cup gun.

• Can be applied in small areas by roller or brush application.

Field Applications

• Heavy industrial equipment

• Oil Field equipment

• Construction equipment

• Airport ground support equipment

• Truck and Trailer Refinishing

Components

6B.1. K1 Base

GSR-F, GSR-M, GSR-S Fast, Medium, Slow, Urethane Reducer

AE.002 Hardener

Mixing Ratio

Mix: Mix three (3) parts base color to one (1) part AE.002 hardener.

Reduce up to 20% with Selected Reducer.

 

Regulatory Information

​

• % Solids By WT:                61.0

• Spec. Gravity:                    1.23

• LBS Per Gal:                      10.26

• Coating VOC g/l:               479.2

• Coating VOC lbs/gal:        4.00

• Material VOC g/l:               479.2

• Material VOC lbs/gal:        4.00