top of page
L7.1.K1 (G).jpg

High Gloss UHS Polyurethane

L7.1.K1 is a 2K High Solids High Gloss Anti-Sag Urethane Topcoat.

Suggested Uses

As a high performance topcoat over suitable primers or over properly prepared substrates, including: Hot and Cold roll steel, Galvanized Steel, Aluminum, fiberglass, plastics and wood


  • Outstanding Gloss and color retention are desired.

  • Outstanding adhesion and flexibility is required.

  • Excellent chemical resistance is required.

  • Low VOC coatings are mandated.

  • Excellent anti-sag qualities.

  • Excellent performance when using air-assist airless, pressure pot, cup gun.

  • Can be used with roller or brush application.

  • With special attention to preparation L7.1.K1 and be used DTM on ferrous substrates.

Field Applications

  • Heavy industrial equipment

  • Oil Field equipment

  • Construction equipment

  • Aircraft and Marine (above the water line)

  • Airport ground support equipment

  • Truck and Trailer Refinishing

  • Equipment, Truck, Trailer OEM finishing.


L7.1.K1 Base

GSR-F, GSR-M, GSR-S Fast, Medium, Slow, Urethane Reducer (National Rule)

AH.002 Hardener (National Rule)

Mixing Ratio

Mix: Mix three (3) parts base color to one (1) part hardener.

Reduce up to 15%-33% with selected suitable reducer.


Regulatory Information

  • % Solids By WT:               64.08

  • Spec. Gravity:                   1.03

  • LBS Per Gal:                      8.52

  • Coating VOC g/l:               366.76

  • Coating VOC lbs/gal:        3.06

  • Material VOC g/l:               366.76

  • Material VOC lbs/gal:        3.06

bottom of page
{ "@context" : "", "@type" : "Organization", "name" : "Lusid Technologies", "url" : "", "sameAs" : [ "", "", "", "", ""] }