1K Gray DTM Primer

​

P8.3.K1 is a 1K, Phenolic Alkyd Primer with built in corrosion resistance and excellent adhesion onto properly prepared hot or cold roll steel and over properly prepared 2K painted surfaces.

 

Suggested Uses

As a wet on wet sealer or primer surfacer. Over hot roll or cold roll steel, fiberglass and sanded 2K coatings where:

• High level of corrosion resistance is needed.

• Excellent adhesion is needed.

• High productivity is required.

• Excellent performance when applied with airless, air-assist airless, airless, pressure pot, cup gun, brush or rolled.

 

Components

P8.3.K1 Base

GSR-F, GSR-M, GSR-S Fast, Medium, Slow Reducer

 

Field Applications

• Structural steel

• Work panel trucks

• Trailers and frames

• Construction equipment

• Many OEM applications

• Oil Field Equipment

 

Mixing Ratio

Mix: P8.3.K1 1K Grey DTM Primer comes ready for use, but can be reduced 0%-10% with selected reducer.

​

Regulatory Information

​

• % Solids By WT:               53.7

• Spec. Gravity:                   1.153

• LBS Per Gal:                      9.622

• Coating VOC g/l:               548.0

• Coating VOC lbs/gal:        4.57

• Material VOC g/l:               548.0

• Material VOC lbs/gal:        4.57