top of page


High Gloss Alkyd


Suggested Uses
As a high gloss topcoat over the following primers.
21.3.70121 2K Grey Epoxy Primer, 6I.4.70133 2K Acrylic Primer Filler, 7I.2.70121 1K Nitro Resistant Primer, on steel, Coachwork (Buses)
work panel trucks, frames, trailers, and wood where:

  • Outstanding gloss is required.

  • Outstanding flexibility is needed.

  • Excellent performance when applied with airless, air-assist airlesspressure pot, cup gun or brush or rolled.


  • 3G.1.K1 Base

  • 0G-005 Synthetic Reducer for Quick Dry Reducers

  • 0A.014 Hardener (optional)

  • 0C.003 Drier for Synthetics (optional)

Mixing Ratio
Mix:              Base is Ready for use by adding 5%-20% Reducer from above.
                    *Option, to speed up dry time, add 0%-5%, 0C.003 drier accelerator.
                    *Option to enhance gloss retention, durability and performance add up to 10% 0A.014                           Hardener.

Apply:          Two medium wet coats, allow 25-35 minutes flash between coats.
                    or apply one medium light coat followed by a medium cross coat.


Spray Gun:   HVLP Gravity Feed – 1.4 – 1.6mm tip and needle
                     Pressure Pot HVLP – 1.0 – 1.1mm tip and needle
                     Air Assist Airless - 1.0 – 1.1mm tip and needle
                     Conventional – 1.4 – 1.7mm tip and needle
                     Airless - 310 – 610 – 312 – 612 nozzle


Film Build:     50-75 microns – (2.0 – 3.0 mils.)

bottom of page