5E.1.K1
MS Acrylic PU 2K Topcoat
Suggested Uses
5E.1.K1 is a high quality Scratch Resistant Acrylic Polyurethane Topcoat designed specifically for the Automotive, Fleet, Transit Authority and Commercial Vehicle Industries. Its high gloss and durability are popular in environments where heavy use and difficult operating conditions are found and cost is a significant factor in the refinish process.
Components
-
5E.1. K1 Base
-
0G.013 Medium Polyurethane Reducer
-
0G.030 Slow Polyurethane Reducer
-
0A.014 Hardener
Mixing Ratio
Mix: Mix two (2) parts base color to one (1) part 0A.014 hardener.
Reduce with selected reducer up to 5%
Application
Apply: Two medium wet coats, allow 10-20 minutes flash between coats.
Spray Gun: HVLP Gravity Feed – 1.4 – 1.6mm tip and needle
Pressure Pot HVLP – 1.0 – 1.1mm tip and needle
Air Assist Airless - 1.0 – 1.1mm tip and needle
Conventional – 1.4 – 1.7mm tip and needle
Film Build: 50-60 microns – when applied as directed.