As a wet on wet sealer or a full bodied sand-able primer, where body repair, scratches
or imperfections need to be filled, machinery, furniture, heavy industrial applications.
Excellent hold out with minimal shrinkage is needed.
Excellent sand-ability is needed.
High productivity is required.
Excellent performance when applied with air-assist airless
pressure pot, Conventional, HVLP, siphon or gravity feed cup gun.
0G.013 Standard Polyurethane Reducer
Mix: Five (5) parts 6I.4.70133 Base to one (1) part 0A.H3
Hardener. Reduce 0-10% with selected reducer for sanding filler and 20-40% for non sanding filler.
Apply: One to three medium wet coats, allow 10-20 minutes flash
Spray Gun: HVLP Gravity Feed – 1.4 – 1.7mm tip and needle
Pressure Pot HVLP – 1.0 – 1.2mm tip and needle
Air Assist Airless - 1.0 – 1.2mm tip and needle
Conventional – 1.5 – 1.8mm tip and needle
Film Build: 50-60 microns per cross coat