7I.2.70121
Nitro Resistant Primer
Suggested Uses
As a non sand or primer surfacer.
-
Over hot roll or cold roll steel fiberglass and sanded 2K coatings where:
-
High level of corrosion resistance is needed.
-
Excellent adhesion is needed.
-
High productivity is required.
-
Excellent performance when applied with airless, air-assist airless, airless,
pressure pot, cup gun, brush or rolled.
Components
-
7I.2.70121 Base
-
0G.002 Standard Nitro Reducer
-
0G.005 Quick drying synthetic Reducer
Mixing Ratio
Mix: 7I.2.70121 Nitro Resistant Phenolic Alkyd primer comes ready for
use, but can be reduced 25% with selected reducer.
Application
Apply: One to two medium wet coats, allow 5-10 minutes flash between
coats.
Spray Gun: HVLP Gravity Feed – 1.6 – 1.8mm tip and needle
Pressure Pot HVLP – 1.0 – 1.2mm tip and needle
Air Assist Airless - 1.0 – 1.2mm tip and needle
Conventional – 1.5 – 1.8mm tip and needle
Airless - 310 – 610 – 313 – 613 nozzle
Brush or roller for small surfaces
Film
Film Build: 60-80 microns